There are quite a few styles of Porter Cable Air Compressors available now. The Porter Cable Air Compressor brand of items is produced by Porter-Cable - a company that has been in business from 1906. The Porter Cable Air Compressors are partners with the Porta-Cable line of movable woodworking power tools. Porta-Cable manufactures its items in Jackson, Tennessee, along with sister company Delta. Porter-Cable and Delta became sister businesses in the year 1960, but they provide different products.

One such example is the 25 Gallon Vertical Air Compressor Portable 60 Gallon Tank 175 PSI. This product features a 175 PSI and a tank that holds the equivalent of 60 gallons. Its high-flow air regulator features a beginning PSI of 145, which tops out at 175 PSI. This product has the top level of moderate-to-heavy use and intermittent tool operation in its class. It includes an oil-free design that is at once tough and simple to care for. It includes a direct-drive twin cylinder. Its 120 volt induction and impressive torque motor offers dependable starting function, too.

Another of the Porter Cable Air Compressor models you should consider is the 20 Gallon Air Compressor 5.1 CFM @ 90 PSI model. This Porter Cable Air Compressor offers a 175 PSI - 49 gallon equivalent tank volume. Its high-flow air regulator starts at 145 PSI and reaches its capacity at 175 PSI. This Porter Cable Air Compressor adheres to the top standards of moderate-to-heavy work and sporadic tool operation in its product category. Trustworthy starting can be achieved by its 120 volt induction and high torque engine. Its '4 Pole' 1725 RPM motor promises an extended operational life and a lower level of noise. You gain remote air regulation as well as control in the surrounding work area of the job site because of the remote 'quadraport' station. This product also includes a high-flow regulator and 4 quick connect bodies.

The last Porter Cable Air Compressor model to look into is called the Oil Free Induction Side Stack Compressor. This device features 6.0 SCFM that enables its 4.3 gallon tank to recharge faster. More extensive tool run-time can be gained through the 150 PSI Max. 120 PSI cut-in pressure offers 30 PSI 'Bonus Air' before making a 90 PSI tool totally defunct. Its 1.6 running HP induction engine was made for extended performance. It also includes push to connect couplers, a High-FloSM air regulator, and an oil-free pump that won't cause oil spillage; the pump needs absolutely no maintenance.